Social networks constituted by social agents and their social relations are ubiquitous in our daily lives. Dynamic processes over social networks, which are highly related to our social activities and decision making, are prominent research topics in both theory and practice.
In this research, two typical social-network-based dynamic processes, information epidemics and opinion dynamics, are inspected aiming at filling the gap between social network analysis and control theory. Analogous to epidemics spreading in population, information epidemics are introduced to describe information diffusion in social networks. Existence of the endemic and disease-free equilibria is thoroughly studied as well as their stability conditions. Additionally, the desired diffusion performance is achieved via an novel optimal control framework, which is promising to solve the open problem of optimal control for information epidemics. Apart from diffusion processes, opinion dynamics describing the evolution of individual opinions under social influence is inspected from control theoretical point of view. We focus on opinion dynamics over social networks with cooperative-competitive interactions and address the existence question: under what conditions, there exist certain kind of distributed protocols such that the opinions are polarized, consensus and neutralized. Particular emphasis is on the joint impact of the dynamical properties of (both homogeneous and heterogeneous) individual opinions and the interaction topology w.r.t. the static diffusive coupling protocols.
Contact / Publication details: Fangzhou Liu
An epidemic model depicts the dynamics of information that diffuses in a social network. The investigation of epidemic modes is motivated by the desire of studying and controlling the spreading of viruses or rumors. In recent years, modeling and control of epidemics have been popularly studied in the fields of sociology, psychology, health care, and social media management. In the first half of 2020, the outbreak of pandemics COVID-19 raises the concern of the reliability of the current public health systems, thus attracting more attention to the control problem of the epidemic models.
In this research, we investigate the filtering and robust control of the epidemic models with uncertain disturbances. Although the susceptible-infected-susceptible (SIS) or susceptible-infected-recovered (SIR) models are able to describe most epidemic scenarios, the inherent randomness and uncertainties of the individuals in the epidemic network are still not fully investigated. As a result, some random phenomenon or exceptional individual behaviors still lack justified interpretations. The control methods without considering the uncertainties may lead to completely different results from the reality. In this topic, we seek for a robust control framework for the epidemic models from the following three perspectives.
1. Deterministic robust control for epidemics with bounded deterministic disturbances;
2. Deterministic robust control for epidemics with Gaussian distributed stochastic disturbances;
3. Stochastic filtering and optimal control for epidemics with Gaussian distributed stochastic disturbances and noisy observations.
By investigating the control solutions for these problems, we expect to produce a generic framework for the robust filtering and control of the epidemic models with applicable potentials.
Liu, F.; Zhang, Z.; Buss, M.: Robust Optimal Control of Deterministic Information Epidemics with Noisy Transition Rates. Physica A: Statistical Mechanics and Its Applications, 2018 [mehr…] [ Volltext ( DOI )] [ Volltext (mediaTUM)]
The hybrid system is a dynamical system that exhibits both continuous and discrete dynamic behavior. Piecewise affine system (PWA) is a special class of hybrid system which can describe systems with switching behavior. The switching signal of PWA system is not exogenous but depends on a partitioning of the state-input space. Thus the estimation of switching hyperplane is a critical point for the identification of the PWA system.
We plan to design an algorithm that can be utilized to estimate the switching hyperplane with the machine learning method, e.g. Support vector machine, Extreme learning machine. The algorithm will realize the estimation with less priori information of the system. like without the orders and number of the subsystems and use the state-input vectors without labels. After achieve the goal of estimating hyperplane of PWA systems, the algorithm will be extended to estimate other hybrid systems.
Contact / Publication details: Yingwei Du
Many physical systems are characterized by the hybrid phenomenon, namely, continuous state evolving and discrete mode switching. The challenges to design controllers for hybrid systems are uncertainties and switching behavior. If the uncertainty is very large or the system parameters vary, a single fixed controller may not be able to stabilize the whole system. In such cases, the uncertainty and varying parameters should be captured by learning approaches and the controller is required to be adaptive. Furthermore, the switching behavior increases the hazard to stabilize the whole system.
The goal of this work is to develop intelligent control approaches, which are also compatible with learning methods, for hybrid systems with uncertainties. Applications include robot impacts (walking, jumping, pick-and-place), soft robotics, flight control, etc.
Contact / Publication details: Tong Liu
The control of robot manipulators has been well investigated in the past several decades, and it attracts considerable attention to address the robustness and tracking accuracy of the controllers. However, the challenges of this problem exist owning to the inherent nonlinear complexity, strong coupling between joints, external disturbances, and unmodeled uncertainties of the robot manipulators. As for the computed torque method, backstepping, and other model-based method, the tracking performance would be deteriorated by the external disturbances, such as friction. Obviously, some techniques, such as disturbance observer and neural network, are employed to identify the disturbances on-line, resulting in strengthening robustness of the controller. Nevertheless, some parameters should be identified on-line, which increases computational complexity.
In this research, we aim to develop the novel robust model-free control method to improve the tracking precision and achieve sub-optimal tracking performance when there exist unknown external disturbances and uncertainties. We would also take the states and controller constraints into consideration to guarantee safety of the system.
Contact / Publication details: Yongchao Wang
While learning techniques have achieved impressive performance in various control tasks, it is unavoidable that during the learning process, the intermediate policies may be unsafe and hence lead the system to dangerous behaviors. In literature, there are mainly two ways to impose safety in the learning algorithms. One is to modify the cost function, and the other is to guide the exploration process.
We aim to utilize the insights from invariance control and supervisory control to impose safety guarantees for learning-based controllers in event-driven hybrid systems. A supervisor is constructed based on the safe set from reachability analysis or invariance function, and this supervisor could guide the learning process to ensure that the system remain inside the safe region when the learning-based controller is searching for an optimal policy.
Contact / Publication details: Zhehua Zhou
Coverage control of a multi-agent system is targeted to achieve an optimal coverage in a convex bounded region using a group of coordinate mobile robots, typically unicycle models. The practical applications of coverage control include area surveillance and probing, earth-base monitoring, ground search and rescueing and environmental exploration. The critical idea of coverage control is to deploy a group of agents to expand the coverage region by solving a locational optimization problem. The optimal solution of this problem renders a Voronoi partition of the given convex region. A coverage controller is expected to steer the virtual centers of the robots to the centroids of the Voronoi partitions so as to minimize the coverage performance function.
This research is dedicated to designing a distributed coverage control method for a large amount of agents that ensures hard compliance with input and state-dependent constraints, which has not been investigated in the state of the art. To avoid the tromendous computational load possibly emerging in a centrolized control scheme, a distributed control structure is necessary, which brings up the challenge of a distributed optimal solution. Additionally, the requirement that the Voronoi centroids must be defined inside the convex region renders a set of hard state-dependent regions, which increases the difficulty of this topic. In this research, we are not only expecting to contribute to solving a frontier theoretical problem, but also targeting to potentially applicable results that satisfy practical demands.
Autonomous vehicles face the challenge of providing efficient transportation while safely maneuvering in an uncertain environment. Uncertainties arise in various forms, among these are sensor inaccuracy and that the controlled ego vehicle is unable to perfectly predict future maneuvers and motion of surrounding vehicles, also known as target vehicles. To give an example, the ego vehicle must be prepared for a sudden target vehicle lane change maneuver.
We develop Model Predictive Control (MPC) methods to advance autonomous driving. In MPC at every sampling time step an optimization problem is solved over a finite prediction horizon. The result is a series of optimal input values for the considered prediction horizon. Then, only the first input is applied to the vehicle and the next optimization step begins, resulting in a closed loop controller. MPC effectively handles constraints that the vehicle must meet, e.g. lane boundaries, speed limits, and collision avoidance.
We tackle uncertainties in the environment by applying Stochastic Model Predictive Control (SMPC). Accounting for all uncertainties may result in overly conservative driving, greatly limiting performance, especially in urban driving situations. In some scenarios collision is even inevitable. In SMPC constraints are adapted, yielding so called chance-constraints. They are not required to always hold, but a probability parameter is chosen that specifies the probability of constraint satisfaction, considering system uncertainty. In other words, a lower probability parameter allows for constraint violation that occurs more often, however performance is increased.
Contact / Publication details: Tim Brüdigam
Autonomous vehicle has drawn more attention in recent years as vehicle application is evolving to an increasingly intelligent and autonomous stage. What the Model Predictive Control considers is task of following a trajectory as an optimization problem in which the solution is the path the vehicle should take.
Safety is a key requirement for autonomous vehicles. However, to satisfy this factor, driving maneuvers may normally be chosen conservatively, meeting losses in its efficiency. Tim Brüdigam proposed the Legible Model Predictive Control method for autonomous vehicles which can contribute to support other traffic participants in inferring the ego vehicle’s planned maneuvers, thus, enabling safe and efficient traffic flow.
We plan to extend legible Model Predictive Control to distributed and legible Model Predictive Control. Our aim is to build a switching controller for ego vehicle. Equipped with the switching controller, the vehicle can select one controller according to current scenario, that is, the vehicle choses Legible Model Predictive Control when necessary, which can almost guarantee safety, and utilizes other controller when it does not need to drive conservatively, which contributes to the improvement efficiency. If every vehicle can be an ego vehicle with switching controller, distributed autonomous vehicles may be feasible.
Contact / Publication details: Ni Dang
Safety is always a critical issue for human-robot collaborative tasks that involve physical human-robot interaction (pHRI). The uncertainties brought by the human cooperators greatly increase the challenges in the design of the man-in-the-loop systems. On the one hand, the task-targets of the systems should be achieved with the existence of human uncertainties, which renders a robustness issue. On the other hand, the human-robot collaboration system should always guarantee the hard compliance of the required constraints to ensure the safety of humans. However, the current technical standard in the manufacturing industry is far from satisfying these demands. Therefore, the design of a safe human-robot collaboration system is still an open problem.
In this research, we attempt to propose a novel safety framework for human-robot collaboration considering human uncertainties and the hard safety requirements by applying both the control-theory-based and machine-learning-based methods. Specifically, the safety framework is mainly concerned with the following four aspects.
1. A high-precision online estimator of external forces that is able to swiftly perceive the human-robot collisions without extrinsic force sensors. The method is based on the sliding mode observation theory which ensures both high-bandwidth and robust precision;
2. A fast and accurate fault diagnosis scheme based on the supervised learning methods, which is able to identify the accidental collisions from the intentional interactions;
3. A sliding-mode-based robust robot motion control scheme that ensures fast and precise tracking of the desired trajectory with hard compliance of the predefined safety constraints;
4. A novel human-motion actuation mechanism based on sliding mode control, which is able to generate human trajectories with robustness to the inherent randomness and uncertainties.
The investigated safety framework involves various research fields including the control and observation theory, machine learning, fault detection and isolation, and stochastic-model-based neuro-dynamics. By proposing such a framework, we expect to take a step forward on the state of the art for a faster, more accurate, and more reliable human-robot collaboration system that benefits the current manufacturing industry.
Contact: Zengjie Zhang
Zhang, Z.; Qian, K; Schuller, B. W.; Wollherr, D.: An Online Robot Collision Detection and Identification Scheme by Supervised Learning and Bayesian Decision Theory. IEEE Transactions on Automation Science and Engineering, 2020, 1-13 [mehr…] [ Volltext ( DOI )] [ Volltext (mediaTUM)]
Zhang, Z.; Leibold, M.; Wollherr, D.: Integral Sliding-Mode Observer-Based Disturbance Estimation for Euler-Lagrangian Systems. IEEE Transactions on Control Systems Technology, 2019, 1-13 [mehr…] [ Volltext ( DOI )] [Volltext (mediaTUM)]
Sun, Y.; Zhang, Z.; (Sobotka), M. Leibold; Hayat, R.; Wollherr, D.; Buss, M.: Protective control for robot manipulator by sliding mode based disturbance reconstruction approach. 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2017 [mehr…] [Volltext ( DOI )] [Volltext (mediaTUM)]
Redundant robots offer many interesting opportunities in manipulation tasks. This redundancy comes with the mathematical problem of an infinite number of joint configurations to result in a desired end-effector pose. However, the performance capabilities of the robot highly relies on the joint configuration, especially when joint limits are considered. In this context we are not interested in finding only the single best possible joint configuration for a task, but on evaluating all possible solutions at once. Therefore we developed an analytical approach of finding a manipulability map for a specific 7dof serial robot configuration. Knowledge about this manipulability map can answer many interesting research questions e.g. optimal mounting pose of the robot, optimal end-effector configuration, optimal kinematic structure etc.
Contact / Publication details: Gerold Huber
There is a vast literature existing on mathematical treatment of elastic bodies. While the classical works offer a very analytical treatment, many of the more recent ones make heavy use of modern computation power for numerical treatment. The motivation for this study comes from a manipulation point of view. While usually in dynamic applications elasticity is tried to be avoided, compensated or suppressed, we want to explore the field of exploiting elastic dynamics. Known ideas either exploit elasticity from a mechanical design viewpoint for passive compliance or safety features. We are interested how highly deformable elastic objects can exploited in an active manner by sophisticated control inputs. As a first case study we consider a classical thin beam that is clamped on one side and free on the other. In contrary to case studied in literature, we want to allow very large deformations.
Contact / Publication details: Gerold Huber
The main focus of this research area is set particularly on industrial assembly processes with mixed Human-Robot teams, which are typically well understood and defined in advance. In order to seamlessly interact with humans, an autonomous agent is required to use the basic rules of an ongoing task to plan ahead the individual possibilities each agent is granted and adapt actions on-the-fly. The main challenge when interacting with a human is that unlike robots, humans do not always follow the same sequence of actions even when a detailed plan is provided. This has thus to be incorporated in the planning, allocation and execution phase accordingly. Therefore, it is of utmost importance to analyze the mutual interference of each action. Thereby, the sequence of actions can be adjusted w.r.t. the human coworkers, unlike classic robot planning in which a robot follows a predetermined sequence of actions.
We propose an assembly planning and execution framework, which incorporates well understood methods of interactive game theory, optimal planning and multi-agent reinforcement learning to grant robots the ability of not only adapting, but to actually cooperate with human co-workers in joint assembly processes.
Contact / Publication details: Volker Gabler
In human-machine interaction, the robot not only needs to satisfy physical constraints due to the limit on mechanical systems but also has to guarantee safety for itself and humans in its surrounding. Therefore, the robot has to evaluate available actions to be taken, interpret human motion with respect to possible tasks currently executed by the human, and select and execute its own action accordingly. Such a safe interaction also requires planning legible motions for the robot that can easily be understood by its human partner.
One of the key aims of this research is to develop novel motion planning methods to enable the robot to proactively interact with human partners. We aim to develop a probabilistic inference based continuous-time motion planning framework that incorporates future human actions and safety constraints for effective HRI in a human-robot assembly setup.
Contact / Publication details: Salman Bari